Aftermarket oil pressure relief screw/plug by GoWesty. This is the screw on the bottom of the engine that keeps the oil pressure spring and piston in. Comes with a washer. Instead of using a large flat blade screwdriver to install this plug, it features a 19mm hex. No more screwdriver slippage! It also features 1/8th inch port so you can easily add an oil temperature sender (available soon).
Fits Vanagon aircooled and watercooled 80 thru 91. Will also fit Type 2 72 thru 79.
Please torque the screw to 15 ft-lbs. DO NOT OVER TIGHTEN!. Tighten the plug with a 3/16" allen key and tighten it 3/4 to 1 3/4 turns past finger tight. Use a vice or a 19mm wrench to hold the screw while tightening the plug.
Not subject to discounts.
Ref ID: GVW025115431
Hover over the icon and click to get the detail.