Front Suspension Parts

Passenger side Syncro steering knuckle. Comes with hub and wheel studs already pressed in as well as the bearing and seals.These may have light surface rust as they are direct from the factory.  We have a very limited supply of this knuckle Ref ID:...

This 18-piece kit will have all of the bushings you will need to rebuild the front end of your 4WD Vanagon using durable Powerflex urethane bushings. This Powerflex kit includes: (1) Front and rear radius arm bushing set (1) Upper control arm bushing...

From T3 Technique. This kit is a direct replacement for the 19 and 21mm stock sway bar. Reduce body roll without resorting to stiffer springs. This bar is made out of 4140 chrome-moly steel and is hot formed then post-form heat treated in a jig to...

Genuine Syncro upper control arm. Ref ID: 251407047C Shop by Diagram Hover over the icon and click to get the detail.  

PowerFlex Polyurethane Upper Control Arm Bushing Kit Enough for 1 vehicle Please click here for the Powerflex Front Suspension Bushing Kit. Ref ID: PFF85-1006x4 NOTE: Due to MAP pricing policies, we cannot offer discounts on the Powerflex line of...

This 20-piece kit has all of the bushings you will need to rebuild the front end of your 4WD Vanagon in original rubber. Please choose either All Rubber Bushings kit (stock) or the kit with  Powerflex Urethane Lower Control Arm Bushings. This kit...

WHY POLYURETHANE SUSPENSION BUSHINGS? Increased Tire LifeDecreased DeflectionIncrease ResponsivenessReduced Braking DistancesImproved PerformanceIncreased Safety Suspension bushings are one of the most highly stressed components fitted to a motor...

This radius arm kit offers you a savings over buying the pieces individually if you are being thorough replacing all parts attached to the radius arms. This kit includes all four bushing (two of each type), the two locking nuts, two non-locking nut(same...

Excellent quality late Syncro drop link for the left (driver's) side. This link fits the cast lower arm and not the press and welded early style. According to VW, the split was around mid-89, but you should check yours before ordering. Ref ID:...

Reproduction late Syncro drop link for the right (passenger) side. This link fits the cast lower arm and not the press and welded early style. According to VW, the split was around mid-89, but you should check yours before ordering. Ref ID:...

Volkswagen Vanagon (1980 - 1992) Polyurethane Lower Control Arm Bushing Kit. Kit includes 2 two-piece bushings (4 pieces, making 2 complete bushings) and 2 sleeves, enough for the entire vehicle. Please click here for...