Cylinder Head & Valve Train

These are new AMC heads, made in Spain and will fit both 1.9Ltr and 2.1Ltr. Initially, these heads had a bad reputation for failure in the valvetrain. This problem was rectified long ago. With the castings for these cylinder heads, the areas prone to...

One pair (left & right) push rod tube protective covers. We get these directly from VW Classic Parts in Germany. For a set of aftermarket stainless steel covers please click here. Fits 1.9Ltr & 2.1Ltr watercooled motors. Ref ID: 025109655-656

TRW brand. Sold individually.Ref ID: 025109612A Shop by Diagram Hover over the icon and click to get the detail.  

Replacement valve cover for all water cooled Vanagon's 1983.5-1991. Sold individually. For the economy covers, please click here. Ref ID: 113101475A-OE

Inner and outer valve spring set. Fits all years watercooled only. Each valve has two springs (one inner and one outer).This combination of springs is same for either intake or exhaust. This is ONE pair of springs for ONE valve. You need quantity 4 if...

TRW brand. Sold individually.Ref ID: 025109601C Shop by Diagram Hover over the icon and click to get the detail.  

This is a new factory VW cylinder head mounting nut that will fit 1984-1991 Vanagon's. 16 per engine required. Sold individually. Ref ID: N90184101

Economy valve cover for all water cooled Vanagon's 1983.5-1991. Sold individually. Please note our experience is that these are made correctly for shape so if yours is beat up or warped and not sealing then this is a great replacement. Do not have high...

Standard intake valve guide. If you need oversized intake guides please inquire.Ref ID: 113101401

Exhaust valve guide. Fits 2.lLtr aircooled, 1.9 &2.1Ltr watercooled. Ref ID: 021101417A

The drain plug bolt and washer for the cylinder heads in 1.9L and 2.1L WBX Vanagon engines. A little tough to replace with push rod tubes in place, but a worthwhile detail during a rebuild or head gasket job. Ref ID: N0147067