Flywheel & Clutch

Vanagon diesel clutch kit from the oringal manufacturer of clutches for the Vanagon. Fits 1.6Ltr and 1.6Ltr turbo diesel.Ref ID: KF28801

This Sachs brand (OEM), 228mm clutch kit will fit all Vanagon gas-powered vans 80 thru 91 as well as Bus 76 thru 79. The kit includes a pressure plate, clutch disc, throw-out bearing, pilot bearing, and clutch alignment tool. It does NOT include the...

We believe this Sachs brand 228mm clutch disc is the best on the market. Stock clutch from original manufacturer. Fits all gasoline-powered Vanagons from 1980-1991.  Also fits late bay-window with 228mm clutch. Our two cents?  Consider a Sachs...

Heavy duty clutch cross arm shaft. There are low-cost alternatives on the market but we don't recommend them as we have found them to be of very poor quality. Fits all 1980-91 Vanagon including Syncro. Also fits Type 2 bay window bus 1976-79.Ref ID:...

This clutch hydraulic pipe runs from the clutch master cylinder pipe in the front of the van to the slave cylinder pipe on the transmission. Fits 2WD vans from 1980-91 Ref ID: 251721471B-AFT

The is a factory VW cross arm bushing kit for all Vanagon's 1980-1991 with a manual transmission including Syncro.   As pictured, the kit includes: CROSS ARM SHAFT BUSHING KIT CROSS ARM SHAFT BRASS BUSHING CROSS ARM SHAFT RUBBER BUSHING CROSS ARM...

This clutch slave cylinder hose is found back near the transmission on early 2WD vans from 1980-2/1985 chassis #24-F-079 999. It connects the metal hard line from the brake master cylinder to the hard line going to the brake slave cylinder. It has...

This plastic bushing supports the cross arm shaft in Vanagons with manual transmissions.  The cross arm shaft is what rotates in the bell housing to push the release (throwout) bearing into the clutch pressure plate.    If you would like...