External Transmission Parts & Mounts

This side screw adjuster is how you adjust the pinion depth and backlash in your VW transmission.  This is an essential procedure when rebuilding your transmission or installing a limited slip differential. Fits all 1980-91 Vanagons with manual...

We found an acceptable aftermarket version of the transmission mount as a less expensive alternative. One per van. Sold individually. Ref ID: 251399201K

The bell housing oil slinger fits 1980-1991 Vanagon four- and five-speed manual transmissions.  It also fits Type 2 bus manual transmissions from 1968-1979.  This slinger is located in the bell housing of the transmission behind the throwout...

This is the plastic cap that bolts to the transmission case and locks the adjusting ring into place. Fits all manual transmission Vanagons including Syncro. Ref ID: 091301197

When you find transmission oil inside your inner CV boot (as opposed to just CV grease), this will be the culprit. The part received may be a different color than pictured here. Not used on automatic transmission applications. Sold individually Ref ID:...

Differential flange lock ring behind drive flange cap and the differential flange concave washer. Two per car. Sold individually.

This washer/plate spreads the clamping force on the plastic cap located on the transmission behind the drive flanges.  The plastic cap locks the side screw adjusting ring into place. Fits all manual transmission Vanagons including Syncro. Also fits...

This is the fastener for the plastic lock plate that locks the transmission sidescrew adjusting ring. Fits all manual transmission Vanagons including Syncro. Two per cap, four per van.  Sold individuallyAlso fits Type 2 bus 1968 thru 79. Ref ID:...