Hoses & Hose Clamps

Replacing a leaky or clogged front heater core in your Vanagon is no joke.  You must pull the entire dash to access the heater box which takes eight to ten hours of labor.  This is definitely a do-it-once, do-it-right kind of job! Fits all...

Our excellent quality silicone engine oil hose kit includes the two hoses that attach to the oil cooler and the two hoses that attach to the other end of the metal lines that attach to those two hoses. If a hose, or multiple hoses, are currently out of...

This excellent quality silicone coolant hose runs from the upper left outlet of the metal H-pipe at the firewall to the thermostat housing on all 1986-1991 Syncros. Fits Syncro only! Silicone has excellent abrasion resistance and is less prone to...

This excellent quality silicone coolant hose connects the radiator return pipe coming from the front of the van to the upper right inlet of the metal H-pipe on the firewall. Fits 1986-1991 Syncros only! Silicone is more resistant to abrasion than rubber...

This excellent quality silicone coolant hose runs from the radiator feed pipe running to the front of the Van to the coolant tower on all 1986-1991 Syncros. Fits Syncro only! Silicone has excellent abrasion resistance and is less prone to deformation...

This top-quality silicone coolant hose fits the radiator return position at the front of the van.  It runs from the bottom outlet of the radiator to the inside front to rear coolant pipe. Silicone lasts far longer and is more resistant to heat...

This top-quality silicone coolant hose fits the radiator supply or feed position at the front of the van.  It runs from the top outlet of the radiator to the outside front to rear coolant pipe. Silicone lasts far longer and is more resistant to heat...

This high quality silicone coolant hose comes off #1-cylinder (right-side front cylinder head) and runs alongside the transmission to the rear heater core tee fitting. Fits all 2.1L watercooled models except diesel. Includes the appropriate stainless...