Rear Suspension Parts

Our extra heavy-duty Bilstein shock set is the preferred shock of choice for heavier Westfalia vans, epecially when combined with the Schwenk 2wd spring sets. Key Features: Fits 1980-1991 T3 2WD Vanagons and Westfalias Bilstein re-calibrated these for...

Upgrade to the number one selling shock absorber for 2WD Vanagons: the Bilstein HD.  Providing firm control when cornering and a soft ride on bumpy roads, the Bilstein HD can't be beat. This kit includes: (2) Front Bilstein Shocks for 2WD...

Set of four Koni Red shocks for 2WD Vanagons.  Incredible performance from one of the top names in the industry. Four-way adjustable for your individual performance and comfort requirements.     NOTE:  All shocks do NOT come with...

Trailing arm for the rear driver side of the VW T3 Vanagon. Fits 1980-91,  all models except 16" Syncro. Ref ID: 251501401E Shop by Diagram Hover over the icon and click to get the detail.  

Trailing arm for the rear passenger side of the VW T3 Vanagon. Fits 1980-91,  all models except 16" Syncro. Ref ID: 251501402E Shop by Diagram Hover over the icon and click to get the detail.  

46MM tool to remove your rear axle nut on both 4WD and 2WD drive Vanagons. Best way to use this tool is slide it over the nut after removing the cotter pin and go at it with a sledgehammer to rotate it. Ref ID: 0057490 Shop by Diagram Hover over the icon...

This rear control arm rubber bushing allows the trailing arm to pivot with suspension travel but also keeps the trailing arm in alignment. You'll need two bushings per control arm, four per van. This is a fairly involved repair.  We recommend...

Rear trailing arm bolt kit. Fits all models, 2WD and 4WD. 2 washers and 1 nut. There are 4 per van for this application. Also fits front lower control arm on all 2wd models. There are 2 per van for this application. Zinc plated, 10.9 grade. Sold...