This kit uses a high-quality German-made rubber with no provision for plastic "chrome" trim.

Kit Includes- Front windshield seal (A), rear-hatch window seal (B), middle seals L&R (C), and both rear-side window seals L&R (D). The kit consists of 6 seals total. Buying in the kit format saves you around $25.

Please note that the sliding door window on 1984 and older models use the same-sized seal as the driver-middle window across from sliding door. For 1985 and newer models, this window is a smaller size and the kit will be sent out as such unless you specify otherwise.

The easiest way to determine whether you need an early or late kit is to measure your sliding door handle. Measure your door handle from the middle of the lock cylinder to the end of the handle. If it measures 5.75" you'll need the late kit. If it measures 7.25" you need the early kit.

NOTE: Professional installation recommended. When installing this seal you MUST locate the vertical seam of the seal in the bottom center of the window opening. Run your installation rope so that you finish the seal installation at the top side of the window - opposite from the seal seam. Failure to do so may split the seal at the seam!

Ref ID: VCCOMPLETEWINDOWSEAL