Our custom lowered oil pan will regain the ground clearance lost during your Subaru conversion. This custom oil pan gives an additional 2" clearance from the stock Subaru pan with a full five-quart capacity. The pans are 100% handmade, with no reused parts in the USA from 12ga. steel, it will not chip, crack, or puncture. Included are a lowered pickup tube, o-ring, and dipstick assembly. Your dipstick will be relocated to the back of your license plate frame for ease of access.

Will fit Vanagons with a 2.2L or 2.5L Subaru Engine Conversion.

**Will NOT fit with Small Car brand engine carrier**

If you need additional crush washers for the drain plug, please click here.

PLEASE NOTE: This is the latest iteration of our Rocky Mountain Westy Subaru Conversion oil pan. We've upgraded the dipstick tube fitting to be a leak-free snap-fit brass fitting. To install the dipstick tube when the pan is mounted, simply apply some silicone RTV around the last 1/2" of the smaller end of the tube, orient it so that the dipstick is accessible from the rear license plate flap of the van and push the tube firmly into place. The tube MUST be installed before the exhaust heatshield is in place.

Powder Coated Product Return Policy:

There is an additional 10% restocking fee applied to all powder coated products being returned

Ref ID: RMW-1001501