Due to its unique design, the Propex HS2211 uses a different ducting system than the other Propex heaters.   These 65mm outlet vents screw directly into this straight connector. ...

This Propex ducting Y-junction can be used to connect sections of 60mm ducting in installations of either the HS2000 or HS2211 heaters. The fitting measures 65mm in its inner diameter and the ducting...

These T-junctions screw directly into either the HS2211 outlet vents or accept all ducting found in HS2000 and HS2211 heater installations. Note:  When installing this junction we highly...

This Propex 76mm adapter is used to connect the 76mm ducting of the HS2800 heater to the outlet vent or ducting junction. Fitment notes: Slide the adapter into the vent or junction first Route your...

Propex Replacement Stainless Steel Mounting BracketIn the case that your original mounting brackets are damaged, here's a spare. Two are used per heater.

Propex 25.5mm-30mm Straight ConnectorHigh temperature silicone, this connector connects the combustion exhaust pipe to the HS2800 heaters combustion outlet. Rated to 500F. Fitment notes: Use...

Propex 22mm-25mm silicone straight connector. High temperature silicone, this connector connects the combustion exhaust pipe to the HS2000 and HS2211 heaters. Rated to 500F. Fitment notes: Use...

Cool your jets!  Under normal operation, the Propex heater combustion exhaust pipe doesn't get hot enough to cause a safety issue, especially if you avoid routing it around combustible material...