Have questions?
Always the correct part
We know our products
Free shipping on most orders over $99!
This LED bulb kit will fit all Vanagons from 1980-91.
This kit contains:
Why you should switch to LED's today
We all know the benefits of upgrading the exterior lighting of our Vans to LED. The bright, instant-on characteristics of LED couple nicely with the radically reduced current draw, leaving more juice for your accessories. This kit will reduce the amperage draw from 18 amps with the stock incandescent bulbs to an amazing 3 amps when using LED.
Why we include Front Turn Signal Load Resistors for the front turn signal bulb holders
Decreasing the current draw with LED turn signals may cause your turn signal relay to flash quickly or not at all. Van Cafe to the rescue! We designed load resistors to install inline with your front turn signal bulbs. They are a simple plug and play installation - no tools or cutting of wires necessary. The resistors plug into the center and BL terminals of the bulb holder. We recommend plugging in the load resistors so that the new terminals face opposite directions. If you have trouble installing the bulb holder with one of the terminals on the outer rim, you can orient the resistor so that both terminals face inward. Still, you MUST then insulate the ground terminal from the van with electrical tape. There is a risk of metal to metal contact if you do not
NOTE: WE DESIGNED THESE TO WORK ON NORTH AMERICAN SPEC VANS. WE HAVE HAD REPORTS THAT THEY DO NOT WORK ON EURO OR AUSSIE SPEC VANS. IF YOUR FRONT TURN SIGNAL HAS A SINGLE FILAMENT BULB, YOU MAY STILL EXPERIENCE HYPERFLASH WITH THIS KIT.
Are the terminals on your bulb holders corroded? Consider replacing them when you upgrade your LED bulbs. We have new bulbs holders at this link: Turn Signal Bulb Holders
PLEASE NOTE: Some of the bulbs have changed and will not match the picture in the kit. We assure you these are all correct and provide the best light.
