German 944 CV joints are the number one solution for vans with higher than stock suspension.  With a greater range of motion, these retain the suspension angles for allowing your van to navigate rough terrain without CV joint binding.

If you have a lifted Van or just want more CV articulation, this is the kit for you!

This kit includes:

• (4) German 944 high articulation CV joints
• (4) German CV boots
• (24) Hardened 12-point CV bolts
• (4) Packs high quality grease
• (4) CV boot clamps
• (12) CV joint lock plates
• (4) CV circlips

Fitment Notes:

• The inner race of the joint has a beveled (chamfered) edge that faces inward, toward the axle.
• This CV joint usually comes with a concave washer, which is not used in this application.
• If you need some serrated washers, please click here:  Serrated CV Washers.

*Please note that the GKN/Lobro CV joints will not fit the Chinese axles on the market.*

Note: As stated in the Bentley factory service manual (page 42.8), your CV joints will need to be installed onto these axles with a press and a bit of anti-seize. New axles are machined to exacting tolerances and are a tight interference fit with the joint. Please be prepared for this step of the installation. Trying to pound them on will only lead to much frustration!