Plastic expansion reservoir with plastic threaded level sensor and cap was never a good idea for hot pressurized coolant. But we do believe that if you do choose to go plastic that we have the best plastic version on the market, but please be aware that there is no warranty on this unit.

We encourage everyone to go with the aluminum version, Aluminum Expansion Tank ("AKA The Tank"), if the budget permits it. 

This reservoir also fits all diesel models from 01/85 from Vin number F060001 on. It is possible to use this reservoir for diesel models 1980 thru 12/84. The easiest way to determine which reservoir you have is to look at the hoses flanges. If the flanges are the same size then you have the early tank. If the upper flange is larger than the bottom, then you have a later tank. To use this tank on the earlier diesel, you will need the following parts:

This is the later version of the diesel 4-way hose and will match the upper flange on this tank.

This is the reverse coolant bottle bracket. The early reservoir mounts differently than the late and you will need this bracket to install it.

If you wish to purchase use our aluminum expansion tank for you diesel please order the 1.9ltr version and please order the bracket in the drop-down menu as well and you will still need to order the hose above.

Does NOT come with cap- If you need a cap, please click HERE

Ref ID: 025121403A

Shop by Diagram

Hover over the icon and click to get the detail.