Volkswagen

The one, the only! The VW T3 Vanagon is an iconic utility van in passenger or camper, pickup or high-top versions. At Van Cafe, we're dedicated to keeping your Vanagon alive and customizing it to fit whatever adventure calls you. We provide custom accessories manufactured right here in Fort Collins, Colorado and high-quality direct replacement parts. Home of the DIY Subaru conversion!

Sidebar Sidebar Sidebar
  • LED Reverse Light Bulb - 420 Lumens! LED Reverse Light Bulb - 420 Lumens!
    Add to Cart The item has been added

    LED Reverse Light Bulb - 420 Lumens!

    This LED reverse light bulb is a great upgrade to your Vanagon. Helps with backing up in dark situations. 420 lumens provides great light without adding additional wiring or drilling into bumper or body. Sold individually Also available as part of our...
    $19.95
    SKU: 001745
    Add to Cart The item has been added
  • Metal Canister Fuel Filter - 1986-91
    Add to Cart The item has been added

    Metal Canister Fuel Filter - 1986-91

    This is the metal canister fuel filter that is used on all 86-91 models and is often on the 84 and 85's. Some 84 and 85's have the smaller square plastic filter instead of or in addition to the metal canister. If you have an 1984 or 1985 it's best to...
    $19.95
    SKU: 002880
    Add to Cart The item has been added
  • Neutral Safety Switch Contact
    Add to Cart The item has been added

    Neutral Safety Switch Contact

    Neutral safety switch contact. This is the safety device to only allow the van to start in park or neutral and also has the contacts which engage reverse lights. If you have to wiggle the stick to get the starter to engage, then these parts are worn out...
    $19.95
    SKU: 001825
    Add to Cart The item has been added
  • Oil Pressure Relief Screw/Plug Oil Pressure Relief Screw/Plug
    Add to Cart The item has been added

    Oil Pressure Relief Screw/Plug

    Oil pressure relief screw/plug. This is the screw on the bottom of the engine that keeps the oil pressure spring and plunger in. Use with an Oil Pressue Relief Valve Sealing Washer. Fits Vanagon aircooled and watercooled 1980-91. Will also fit Type2 Bay...
    $19.95
    SKU: 001353
    Add to Cart The item has been added
  • Propex Fixed Directional Vent
    Add to Cart The item has been added

    Propex Fixed Directional Vent

    This Propex fixed directional vent is used with either 60mm (for HS2000) or 76mm (for HS2800) reducers to connect to the outlet ducting during heater installation. You would use this vent in the case that you want more than one vent in your installation...
    $19.95
    SKU: 001173
    Add to Cart The item has been added
  • Propex Open/Close Vent Propex Open/Close Vent
    Add to Cart The item has been added

    Propex Open/Close Vent

    Customize your Propex heater installation by upgrading to this open/close vent to finish out your heat ducting.  This vent also rotates to put the hot air exactly where you want it. Fitment notes: To attach this vent to the 60mm ducting for your...
    $19.95
    SKU: 001171
    Add to Cart The item has been added
  • Push Rod Tube for 1.9L & 2.1L (Stainless Steel)
    Add to Cart The item has been added

    Push Rod Tube for 1.9L & 2.1L (Stainless Steel)

    Stainless steel push rod tube for 1.9L and 2.1L Vanagon motors.  Eight per Van, sold individually. Note: To install this tube, the cylinder head must be removed from the motor.  If you don't want to remove the cylinder head, we also offer...
    $19.95
    SKU: 001344
    Add to Cart The item has been added
  • Rear Coil Spring Lower Pad Rear Coil Spring Lower Pad
    Add to Cart The item has been added

    Rear Coil Spring Lower Pad

    This plastic lower pad for the rear coil springs prevents metal to metal contact between the rear spring and trailing arm.  If you spring pads are worn, the spring can damage the trailing arm over time. Fits all 1980-1991. One per side.  Two...
    $19.95
    SKU: 002099
    Add to Cart The item has been added
  • Rear Wheel Bearing Spacer
    Add to Cart The item has been added

    Rear Wheel Bearing Spacer

    This precision made rear wheel bearing spacer is responsible for maintaining the correct lateral tension on your rear wheel bearings. Fits all models Vanagon 1980-1991 Also fits 1968-1971 Bay window buses One per side, two per van Sold individually...
    $19.95
    SKU: 001881
    Add to Cart The item has been added