Wheels, Tires, Driveshaft

Lobro is the brand that we prefer for the standard boot. If you're looking for a sturdier boot, we carry the Rockford boots here . If you need some serrated washers, please click here .Ref ID: 251598201

46MM tool to remove your rear axle nut on both 4WD and 2WD drive Vanagons. Best way to use this tool is slide it over the nut after removing the cotter pin and go at it with a sledgehammer to rotate it. Ref ID: 0057490 Shop by Diagram Hover over the icon...

This precision made rear wheel bearing spacer is responsible for maintaining the correct lateral tension on your rear wheel bearings. Fits all models Vanagon 1980-1991 Also fits 1968-1971 Bay window buses One per side, two per van Sold individually...

Redline CV-2 grease outperforms the best conventional or synthetic greases and lubes. Withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints. Also great for use with Poly Urethane bushings. Excellent high-temp...

12 CV joint bolts and washers come in this kit for both 2WD and 4WD axles. This kit uses 12-point AKA triple square bolts as we feel these are superior to the 6 point bolts when installing and or removing them. This is enough to do one axle, if you are...

Excellent quality rear inner wheel bearing.  If you hear a rumbling from the rear of your van at speed on the highway, you may need a new wheel bearing.  Don't skimp on this critical repair! Fits all models 1980-91 Also fits bay window buses...

These longer-than-stock 45mm wheel studs are sold in sets of five and are perfect if you're running wheel spacers. Please note whenever changing the length of studs, you must confirm that the nut does not bottom out on the stud before it tightens the rim...

These hub caps are for the stock 14 inch alloy rim. It is our opinion though that the color is just slightly darker than the originals, but the fit is excellent and these are the only game in town. Sold individually. Ref ID: 251601171

Front outer wheel bearing for late-model vans. This will fit all 1985-91 2WD and later 1984 Vanagons. According to Volkswagen, this bearing will fit from chassis number 24-E 023828, but in some cases, we have found this to be incorrect. The best way to...

This 46mm rear axle nut is CRITICAL to the rear drivetrain of your van or bus! Without proper torque of 360 ft/lbs, this nut can come loose and ruin your day. Fits all Vanagon models 1980-91 Fits all bay window bus models 1968-71 Fits split window bus...

Early front outer wheel bearing. This will fit all 1980-83 Vanagons and early 1984. According to Volkswagen, this bearing will fit up to chassis number 24-E 023827, but in some cases, we have found this to be incorrect. The best way to check is to...