Manual Transmission

Magnetic drain plug for manual transmissions.  The magnet is designed to catch any metal particulates and save the soft components of your transmission internals. Be sure to clean off any metal shavings each time you replace your transmission fluid...

Hey look!  Another specialty tool for your tool box! This 17MM Hex-head wrench is crucial for removing the drain and fill plugs on your Van's transmission.

Pack of two socket bearings required to rebuild the shifter base of all manual-transmission Vanagons.  These are also included in our complete shifter base rebuild kit. Shop by Diagram Hover over the icon and click to get the detail.  

Genuine VW shift fork guide ball sleeve.  There are six required for all manual transmission Vanagons. We HIGHLY recommend replacing these ball sleeves at each transmission rebuild as the slider ball bearing can fall into the transmission if this...

Fill plug for all manual & automatic transmissions. Uses 17mm allen wrench. Also for you Syncro owners this is the fill plug for the front diff as well. Don't forget this 17mm allen wrench for removal and replacement. Sold individually Ref ID:...

Plastic hemisphere for the14mm Vanagon shifter.  This part slips in the bottom of the metal shifter lever (what you shift with) and is captive in a round shell that limits the travel of your shifter.  If your shifter has become sloppy, it may...

Excellent quality main shaft needle bearing for all Vans with manual transmissions. Ref ID: 002311125A

Permatex ultra black oil resistant silicone gasket maker. On Syncros, we use this sealant for the decoupler, the bell housing gasket and if you are so inclined, the bell housing to engine case surfaces. The bell housing to the engine case surfaces came...