Front Suspension Parts

 This nut attaches the rear trailing arm in 1980-91 Vanagons. Fits both 2WD and Syncro. Four per van, sold individually. Ref ID: N10105507

This upper control arm washer lives under the upper control arm nut that affixes the arm to the chassis. Fits all vans 1980-1991.  Two per van, sold separately. Please note that these are not the eccentric washers that are on the control arm bolts...

Rear control arm bolt washer. Fits all years and configurations of the VW T3 Vanagon. Eight washers per vehicle. Sold individually. Ref ID: 481501543

This eccentric washer is used to align the front suspension in Syncro Vanagons.  It is used in conjunction with the upper control arm bolt to set the camber in the front end. The width of the space this washer sits in is critical for the alignment...

This eccentric washer is used to align the front suspension in Syncro Vanagons.  It is used in conjunction with the upper control arm bolt to set the camber in the front end. The width of the space this washer sits in is critical for the alignment...

This eccentric washer is used to align the front suspension in Syncro Vanagons.  It is used in conjunction with the upper control arm bolt to set the camber in the front end. The width of the space this washer sits in is critical for the alignment...

This eccentric washer is used to align the front suspension in Syncro Vanagons.  It is used in conjunction with the upper control arm bolt to set the camber in the front end. The width of the space this washer sits in is critical for the alignment...

This eccentric washer is used in conjunction with the upper control arm for camber adjustment when doing a front end alignment.  This washer is 4mm in width, which is the original size for all 2WD and some Syncros. Fits all 1980-91...

This nut secures the front upper control arm by tensioning the long upper control arm pivot bolt through the bushings.  If you are replacing the bushings in your front suspension, we recommend replacing both this nut and the pivot bolt. Fits 1980-91...

This nut pulls double duty in the Vanagon It is used to secure the front lower control arm bushing. It is also used to secure the lower end of the rear shock absorber.  Fits 1980-91 2WD and Syncro Vangagons Sold indivdually. Ref ID: N0110207

Thsi upper ball joint bolt attaches the ball joint to the upper control arm. Fits 1980-91 Vanagons, both 2WD and Syncro. Two per ball joint, four per van.  Sold individually. Ref ID: N0447273 Shop by Diagram Hover over the icon and click to get the...

This sway bar drop link nut attaches the drop link to the control arm.  As did the originals, these nuts are correctly machined oval to lock in place. Fits all 1980-91 Vans.  Two required per van, sold individually. Ref ID: N10209005 Shop by...