External Transmission Parts & Mounts

This side screw adjuster is how you adjust the pinion depth and backlash in your VW transmission.  This is an essential procedure when rebuilding your transmission or installing a limited slip differential. Fits all 1980-91 Vanagons with manual...

The bell housing oil slinger fits 1980-1991 Vanagon four- and five-speed manual transmissions.  It also fits Type 2 bus manual transmissions from 1968-1979.  This slinger is located in the bell housing of the transmission behind the throwout...

Fill plug for 2WD (manual & automatic transmissions) and 4WD. Uses 17mm allen wrench. Also for syncro owners this is the fill plug for the front diff as well. Sold individually Ref ID: WHT001937

17MM Hex-head wrench for the drain and fill plugs on a manual transmission.Ref ID: VC17MMPLUGTOOL

This is the plastic cap that bolts to the transmission case and locks the adjusting ring into place. Fits all manual transmission Vanagons including Syncro. Ref ID: 091301197

This corrosion-resistant stainless steel reproduction replaces the corroded washers on the transmission and differential mounts in your Vanagon Syncro.  Locations where found: Transmission: On top of the two upper transmission mounts - Total qty...

When you find transmission oil inside your inner CV boot (as opposed to just CV grease), this will be the culprit. The part received may be a different color than pictured here. Not used on automatic transmission applications. Sold individually Ref ID:...

17MM Transmission drain plug socket, 3/8 drive.   Ref ID: VCTRANSPLUGTOOL

This bolt pulls double duty in the VW Vanagon It serves as the front differential mount in Syncros (horizontal cross bar and side mounts). This bolt does the horizontal cross bar to the differential and the two side mounts. This is also the transmission...