Go

Engine Mechanical

Sidebar Sidebar Sidebar
  • Stainless Exhaust Header kit for vw vanagon with tiico engine conversion Stainless Exhaust Header for vw vanagon with tiico engine conversion
    Add to Cart The item has been added

    Stainless Tiico Exhaust Header

    A perfect exhaust header solution for your TIICO - Vanagon conversion! Includes the donut and the gasket. Features: Mandrel-bent 304L stainless steel tubing Jig-fabbed and TIG-welded for a perfect fit every time Complete with new exhaust donut Designed...
    $799.95
    SKU: KT-006283
    Add to Cart The item has been added
  • Cylinder Head New 1.9L / 2.1L
    Add to Cart The item has been added

    Cylinder Head New 1.9L / 2.1L

    These are new AMC heads, made in Spain and will fit both 1.9Ltr and 2.1Ltr. Initially, these heads had a bad reputation for failure in the valvetrain. This problem was rectified long ago. With the castings for these cylinder heads, the areas prone to...
    $589.95
    SKU: 001329
    Add to Cart The item has been added
  • Vanagon 2.1L Throttle Body Vanagon 2.1L Throttle Body
    Choose Options

    Vanagon 2.1L Throttle Body

    Upgraded Throttle Body for 1986-91 2.1ltr vans.  Worn throttle bodies have increasingly become the culprit for rough running or lean running conditions. When the bushings wear, an intake leak develops through the throttle shaft area, and the...
    $389.95 - $399.95
    SKU: 2.1LThrottlebody
    Choose Options
  • Sold out
    Rebuilt Air Flow Meter 2.1L
    Out of stock

    Rebuilt Air Flow Meter 2.1L

    Fits 86 thru 91. This unit includes the widely recommended upgraded filter cable circuitry (capacitor soldered inside the unit during the rebuild) to address the dreaded Vanagon Syndrome. Although we have been using the same rebuilder for over tens years...
    $259.95
    SKU: 001476
    Out of stock
  • 2.1L Engine Mount Bracket
    Add to Cart The item has been added

    2.1L Engine Mount Bracket

    This is the engine bracket that the motor mounts attach to. Fits all 2.1ltr engine 2wd and 4wd. Is also used on 1.9ltr engines when converting to the Rocky Mountain Westy stainless steel exhaust. Sold individually. Ref ID: 025199221A  
    $253.75
    SKU: 001436
    Add to Cart The item has been added
  • Sachs Complete Clutch Kit for Vanagon
    Add to Cart The item has been added

    Sachs Complete Clutch Kit for Vanagon

    This Sachs brand (OEM), 228mm clutch kit will fit all Vanagon gas-powered vans 80 thru 91 as well as Bus 76 thru 79. The kit includes a pressure plate, clutch disc, throw-out bearing, pilot bearing, and clutch alignment tool. It does NOT include the...
    $199.95
    SKU: 001492
    Add to Cart The item has been added
  • Vanagon Forged 228mm Flywheel Vanagon Forged 228mm Flywheel
    Add to Cart The item has been added

    Vanagon Forged 228mm Flywheel

    New forged flywheel. Fits all Vanagon except for diesel- Will also 76 thru 79 Type 2 with the 228mm clutch. Comes with 3 dowel pins. Please click here for a new main seal, flywheel bolts, flywheel o-ring, pilot bearing, pilot bearing seal, and felt...
    $177.95
    SKU: 001339
    Add to Cart The item has been added
  • Vanagon Engine Gasket Set
    Add to Cart The item has been added

    Vanagon Engine Gasket Set

    German gasket set - includes all seals pictured. Please note that amongst other seals and gaskets this kit does include both the rear main seal and front crank seal. The kit includes all seals and gaskets used during engine assembly and all gaskets and...
    $144.95
    SKU: 001425
    Add to Cart The item has been added
  • Sold out
    Push Rod Tube Protective Covers
    Out of stock

    Push Rod Tube Protective Covers

    One pair (left & right) push rod tube protective covers. We get these directly from VW Classic Parts in Germany. For a set of aftermarket stainless steel covers please click here. Fits 1.9Ltr & 2.1Ltr watercooled motors. Ref ID: 025109655-656
    $141.65
    SKU: 001350
    Out of stock
  • Waterboxer Push Rod Tube SHields Waterboxer Push Rod Tube SHields installed on motor
    Add to Cart The item has been added

    Waterboxer Push Rod Tube SHields

    Protect your fragile pushrod tubes from gravel and road debris with our upgraded stainless steel covers. These are the covers used with our custom stainless wasserboxer exhaust. Made from 16-gauge 304L stainless steel Attach to your stock pushrod tubes...
    $119.95
    SKU: 003651
    Add to Cart The item has been added
!