Westfalia Parts

Propex silicone 90-degree elbow used to attach the combustion exhaust pipe in the HS2000 and HS2211 heater models.  The original connector is straight.  This optional 90-degree bend allows for routing the exhaust pipe with fewer bends...

Skylight guide. One per van.Not subject to discounts.Ref ID: 253070786

If you have rain streaming or wind squealing through your skylight, you may need a new seal. Super easy installation! Ref ID: 253070765

This Propex directional vent is used with either the 60mm (for HS2000) or 76mm (for HS2800) reducers to connect to the outlet ducting of the heater install. You would use this vent in the case that you want more than one vent in your installation. Use of...

Westfalia stove knob in grey.  Replace your scungy original with this new reproduction. Fitment size for stove knob post is 15/64" or 5.95mm. Sold individually. Ref ID: 255070601L

Replace the rusty carriage bolts in your Westfalia poptop with this bolt set.  Shiny! Contains all 15 bolts required.

These T-junctions screw directly into either the HS2211 outlet vents or accept all ducting found in HS2000 and HS2211 heater installations. Note:  When installing this junction we highly recommend installing the long straight top of the tee...

This Propex ducting Y-junction can be used to connect sections of 60mm ducting in installations of either the HS2000 or HS2211 heaters. The fitting measures 65mm in its inner diameter and the ducting simply slides into either end of the fitting.

Skylight flexarm support bracket. This bracket is what the skylight flex arm (the contraption with the two little arms that raise the skylight) mounts to.Ref ID: 253070757

Permatex Weather Stripping cement to be used with poptop seals and skylight seals. Also useful on any body weatherstripping that requires glue. Just use a thin bead, a little goes a long way.Ref ID: 81850

Westy Cabinet Handle GreyRef ID: 231067965GREY