Manual Transmission

Transmission input/pilot shaft for all Vanagons except diesel models.  Also VW bus 1972-79. This is a factory VW part!  Forget the rest, buy the best!   Ref ID: 091311105

Transmission pinion bearing. FAG brand - made in HungarySold individually. Ref ID: 091311219

Early shift lever. Bolts to the side of the transmission. Fits aircooled and diesel 80 thru 83.4, all models with the 3-piece shift rod. Ref ID: 251711219

Powerflex polyurethane transmission mount bushing. Fits 1.9Ltr watercooled and 2.0Ltr aircooled with manual transmissions. This kit will not fit vans with automatic transmissions. NOTE: Due to MAP pricing policies, we cannot offer discounts on the...

Finally! We have found a 14mm shift lever. This is an exact copy of the original 14mm lever with the exception that is solid and not hollow and it has the notch not only for the stock location for the lock collar but also a notch (upper) for the short...

Complete or even a "Deluxe" shifter base repair kit. Vanagon's thru mid-83 (Early) should have a 12mm diameter shift lever. Mid-83 and on (Late) have a 14mm shift lever shaft. PLEASE CONFIRM YOURS. Some early shift levers have been replaced with the 14mm...

We found an acceptable aftermarket version of the transmission mount as a less expensive alternative. One per van. Sold individually. Ref ID: 251399201K

This is the shift selector lever for diesel vans only. This will not fit gasoline Vanagon's as it is roughly 10mm (105.5mm) longer. Fits all diesel models 83.4 tru 91. Please click here for a replacement roll pin. Ref ID: 251711973A   Shop by...

Metal sprayed syncros - the good ones. These are the synchros with the full complement of teeth - all the way around. These were use for 2nd, 3rd, 4th. Although it can be used for 1st as well, 091.311.247B with partial teeth count was originally used...