Our custom shortened oil pan will regain the ground clearance lost during when performing a Subaru conversion in your Vanagon or bay window bus.

• Gives an additional 2" clearance from the stock Subaru pan
• Full five-quart capacity
• 12-gauge steel
• Dipstick exits in the stock Vanagon location behind the licence plate
• 100% handmade in Fort Collins, Colorado
• Free shipping to most addresses!

Will fit Vanagons and bay window buses with a 2.2L or 2.5L Subaru Engine Conversion.

**Will NOT fit with Small Car brand engine carrier**

If you need additional crush washers for the drain plug, please click here.

PLEASE NOTE: This is the latest iteration of our Rocky Mountain Westy Subaru Conversion oil pan. We've upgraded the dipstick tube fitting to be a leak-free snap-fit brass fitting. To install the dipstick tube when the pan is mounted, simply apply some silicone RTV around the last 1/2" of the smaller end of the tube, orient it so that the dipstick is accessible from the rear license plate flap of the van and push the tube firmly into place. The tube MUST be installed before the exhaust heatshield is in place.

Powder Coated Product Return Policy:

There is an additional 10% restocking fee applied to all powder coated products being returned

Ref ID: RMW-1001501

Instructions

Oil Pan Install