Electrical & Thermostats

Propex heaters have been reliably heating vehicles for over twenty years, often outliving the vehicle in which they're installed.  Because there are so many heaters out in the wild, we offer this complete installation kit to re-install your heater...

Propex heaters have been reliably heating vehicles for over twenty years, often outliving the vehicle in which they're installed.  Because there are so many heaters out in the wild, we offer this complete installation kit to re-install your heater...

Propex heaters have been reliably heating vehicles for over twenty years, often outliving the vehicle in which they're installed.  Because there are so many heaters out in the wild, we offer this complete installation kit to re-install your heater...

Propex digital thermostat. Fits HS2000, HS2211, HS2800 heaters manufactured after 2015. Fitment notes: You do not need to replace your thermostat harness to upgrade to this thermostat if your heater is manufactured after April of 2015. This thermostat...

For those intrepid adventurers that like to camp high, Van Cafe is proud to offer the Propex Heater High Altitude Modification Service.  Much like when you climb a mountain, combustion heaters need to breathe a little harder at elevation.  With...

This Propex thermostat control wiring harness fits HS2000 and HS2800 heaters manufactured from April 2015 to current.  While thermostat harnesses don't typically go bad, we offer this harness in case yours is physically damaged or if you are...

This Propex thermostat harness extension is approx 3.5 meters (11.5 feet) This harness is an extension harness only. It attaches to your thermostat harness on one end and your thermostat on the other. For current model HS2000, HS2211 and HS2800 model...

If the end cap on your HS2211 is damaged, we recommend replacement to keep your unit from dust contamination. New seal included!   Ref ID: 2986166

Propex 12V power loom for HS2000 and HS2800 heaters manufactured after 2010. Fitment Notes: Approx. 11 feet in length Two wire, three-pin connector You will need to install a 5A inline fuse into the 12V power wire to protect your heater. Reinstalling a...