Ducting, Vents, Combustion Pipes

Quiet as a feather!   Even advanced combustion heaters like the Propex HS2000 create a small amount of noise during operation.  Eliminate that noise with our Propex Stealth Kit! Contains: Intake Muffler Exhaust Muffler with Exhaust Pipe 1...

Easily route the heated air from your Propex PS2000 Portable Heater into your tent or ice fishing hut using our handy universal tent flange! Simply install the thermostat cable, attach the PS2000 ducting, and zip the flange into the zippered entrance to...

Quiet as a feather! Even the most advanced combustion heaters make some noise during operation.  Quiet your Propex HS2000 with our 60mm acoustic ducting. Fitment Notes: Sold in one meter lengths Replaces the hot air ducting from the heater to the...

Propex 26mm stainless steel combustion intake or exhaust pipe. Fits Propex HS2800 heaters One meter length Includes steel end cap Fitment Note: Install both combustion intake and exhaust pipes with a slight downward slope to avoid water pooling NEVER...

Propex 22mm ID stainless steel exhaust pipe with end cap suitable for the HS2000 and HS2211 heaters.  You can also use this as a heavier duty intake pipe if you'd like to replace the standard paper/foil hose. One meter is 3.28 feet or 39.3 inches...

This is the 76mm APK ducting that comes with the HS2800 heater.   APK ducting is moisture-resistant meaning that it will hold up if you have a little spill.Sold by the meter. One meter is 3.28 feet or 39.3 inches.Ducting for the HS2000 can be...

Cool your jets with this combustion heat sleeve for the Propex HS2800!  Under normal operation, the Propex heater combustion exhaust pipe doesn't get hot enough to cause a safety issue, especially if you avoid routing it around combustible material...