Propex Heaters

Flame King 1-lb REFILLABLE propane canister.  Stop wastefully contributing to the landfills by purchasing disposable propane canisters.  This 1-lb canister is easily refilled at home with the Flame King refill kit. The perfect tank for our...

65mm open/close vent for Propex and Whale heater installations.  Terminate your 60mm ducting by inserting into this vent.  Beige in color.

90mm 90-degree ducting fitting for use when plumbing Whale GTR-10 or GTR-15 space heaters.  This fitting allows a robust connection when passing the ducting through the floor of your vehicle. Click here for more info on the awesome Whale GTR-10 and...

This Propex directional vent is used with either the 60mm (for HS2000) or 76mm (for HS2800) reducers to connect to the outlet ducting of the heater install. You would use this vent in the case that you want more than one vent in your installation. Use of...

Are you imagining a custom installation of your Propex heater ducting?  This Y-junction allows you to create a branch for a separate outlet to distribute your heater output. Fitment notes: Must be used in conjuntion with either the 60mm adapter...

This 90mm to 65mm reducer allows you to convert from 90mm to 60mm ducting in your Whale heater installation.

These T-junctions screw directly into either the HS2211 outlet vents or accept all ducting found in HS2000 and HS2211 heater installations. Note:  When installing this junction we highly recommend installing the long straight top of the tee...

This Propex ducting Y-junction can be used to connect sections of 60mm ducting in installations of either the HS2000 or HS2211 heaters. The fitting measures 65mm in its inner diameter and the ducting simply slides into either end of the fitting.

Propex 12V power loom for HS2000 and HS2800 heaters manufactured after 2010. Fitment Notes: Approx. 11 feet in length Two wire, three-pin connector You will need to install a 5A inline fuse into the 12V power wire to protect your heater. Reinstalling a...