This Propex 22mm Marine Thru-Hull Fitting was originally designed for marine applications but many have found it useful in land-based installations of their HS2000 or HS2211 heaters. Sandwiches an...

26mm End Cap for HS2800 Combustion Piping This cap fits on the outboard end of the combustion piping for the HS2800 heater only Note:  these end caps were originally crimped at the Propex...

The ultimate space-saving solution for installing a Propex HS2800 space heater in your Promaster!  Tuck your heater in the dead space under the passenger seat and enjoy consistent, dry heat for...

Propex heaters have been reliably heating vehicles for over twenty years, often outliving the vehicle in which they're installed.  Because there are so many heaters out in the wild, we offer...

Propex 12V power loom for HS2000 and HS2800 heaters manufactured after 2010. Fitment Notes: Approx. 11 feet in length Two wire, three-pin connector You will need to install a 5A inline fuse into the...