This is the regular Federal/EPA compliant catalytic converter that will fit either 1.9ltr or 2.1ltr. The catalytic converter comes with a threaded hole for the oxygen sensor for the 2.1. For the 1.9, where the oxygen sensor is positioned in the pipe upstream from the cat, we sell a plug for the cat.

Please click here for the CARB Compliant catalytic converter.

Inlet Diameter (In): 2 Inch
Outlet Diameter (In): 2 Inch
Body Material: Stainless Steel

2.1Ltr gasket information: If you have a 2.1Ltr van, 2wd, or 4wd, we highly recommend that you include the 2.1Ltr gasket/hardware kit above. There is no rhyme or reason to which J pipe Volkswagen used while assembling your exhaust. One J pipe will use a gasket to the catalytic converter, and the other will use a donut, and although the catalytic converter flange is flat, if your J pipe takes a donut, you will have to use the donut. It may not look correct, but from our experience installing these catalytic converters in our shop, the donut seals just fine.

Please make sure your oxygen sensor is functioning correctly before installing a new catalytic converter. Our shop installs a new oxygen sensor with every convertor we install. Failure to do so may result in the premature failure of the catalytic converter!

NOTE:  If you are in a state with CARB-compliant emissions laws, you must select the CARB version of this exhaust.  We cannot ship Federal-emissions catalytic converters to California, Colorado, Connecticut, Maryland, Minnesota, New Jersey, and New York, which have adopted CARB-compliant emissions standards

Ref ID: 025131701A