This 20-piece kit has all of the bushings you will need to rebuild the front end of your 4WD Vanagon in original rubber.

Please choose either All Rubber Bushings kit (stock) or the kit with  Powerflex Urethane Lower Control Arm Bushings.

This kit includes:

• (2) Front Radius Arm Bushings 251407179
• (2) Rear Radius Arm Bushings 251407175
• (4) Upper Control Arm Bushings 251407077
• (2) Stock Lower Control Arm Bushings 251407183 (or select Urethane Lower Control Arm Bushings PFF85-101X2)
• (2) 21MM Sway Bar to Body Bushings 251411041C
• (2) 21MM Sway Bar to End Link Bushings 251411045
• (2) Upper Front Shock to Body Bushings 701513121
• (4) Sway Bar to End Link Bushings 251411039

Fitment note:  Please choose either 19mm or 21mm Sway Bar Bushings.  Most Syncros came with 21mm sway bars but it is important to verify which size sway your van has (19 or 21). This is simple to check. Just take a 19mm and/or 21mm open end wrench under the front end and see which one slides onto the sway bar.

This kit now has the option for the Powerflex Urethane Lower Control Arm Bushings. While the cost is a little more than the kit with the stock lower control arm bushings, the urethane bushing is two piece and is infinitely easier to install!

If you are uncertain of the condition of your metal radius arm and drop link sleeves, please consider adding them to your order as they are not included in this bushing kit.

Feel like upgrading to urethane?  Please click here for the full Powerflex 4wd bushing kit.