New hall-throttle position switch by Shoebox Electronix.  The hall switch provides idle and full throttle signals to your ECU electronically, as opposed to finicky vacuum systems, or mechanical microswitches.  We've even provided an LED indicator to make adjusting your new switch easier!  Three-year manufacturer warranty!

Fitment notes:

• This kit will fit throttle bodies with a single switch.  If your van has dual switches this kit will not work for you.
• Your old grey cam is replaced with a magnet disc, containing two 4.8 gauss Neodymium magnets, which activate a hall sensor at the two throttle shaft endpoints.
• All components are pre-mounted on a double-sided printed circuit board, which is tested individually with the Magnet Disc supplied with your kit.
• All required parts, along with a detailed installation manual are included.

Installation:

• Simply remove your old microswitch, replace it with the circuit board assembly, and make two simple connections to 12V and ground with wires & connectors provided, reconnect the two wires from your old switch, and your installation is complete. 

Shop by Diagram

Hover over the icon and click to get the detail.