Hardware & Gaskets

Gasket set includes 6 - 2 bolt flange gaskets, 3 catalytic converter gaskets, 2 donuts, and 1 tailpipe gasket. Some elbow pipes, depending on the style of the flange, take flat gaskets and some take donuts so this kit includes both to ensure that you...

Kit includes: 4 studs, 26 various length bolts, 24 washers, and 21 nuts. At cylinder head, use 4 studs, 4 - 30mm bolts, 8 wavy washers and 4 regular nuts. Use 3 30mm bolts and 3 wavy washers for the tailpipe. Use 30mm bolts (or 40mm when metal donut is...

2.1Ltr catalytic converter gasket and hardware set. Includes 2 gaskets 1 donut 6 copper lock nuts 6 washers 6 bolts. The reason we supply two gaskets and a donut is your van could have either where the catalytic converter joins with the J pipe and it...

Install your Vanagon tailpipe with the factory correct hardware.  Includes everything you need to get to attach your tail pipe to your muffler. Fits 1980-91 Vanagons with air cooled and WBX 1.9L and 2.1L motors. Note: The threads in your OEM muffler...

This is the cap that screws onto the test tube on the exhaust elbow before the catalytic converter. This outlet allows you to test the exhaust before the catalytic converter. When analyzing emissions to set mixture or diagnose a running issue, it can be...

Catalytic converter to muffler gasket.  Fits 1.9L and 2.1L watercooled and all air-cooled Vanagons. Fits both CARB-compliant and Federal-standard emissions. Ref ID: 443253115B

All new hardware for your 1.9L and 2.1L exhaust saddles.  The saddles hold the muffler system and secure it to the body of the van.   Renew your rusty/broken fasteners today!

Sold individually. Ref ID: 855253137A

Muffler to tailpipe gasket. Fits aircooled 80 thru 83.4, All diesel Vanagon, except turbo diesel, 1.9Ltr & 2.1Ltr watercooled. Ref ID: 025251235

Multi-layered metal sealing gasket for sealing exhaust manifolds to the cylinder head and one other junction on the exhaust system. Fits 1983.5-91 1.9L & 2.1L watercooled vans.Ref ID: N90131602

8X38mm. These exhaust manifold studs attach the header pipes to the cylinder head. Van Cafe recommendation:  If the studs on your motor are in good shape then leave them alone, but if they are stripped, corroded, or broken off then you will need...