Fuel Delivery

Excellent quality stainless steel pinch clamp. These are commonly used to seal the fuel expansion tank hoses to the plastic lines that run from fuel tank to expansion tank in your Vanagon. Note: these are Oetiker style pinch clamps.  You'll need a...

Stainless steel hose and tube clamp.  Commonly used in the VW T3 Vanagon to clamp the fuel vapor hoses which run from the fuel tank to the fuel expansion tanks in the front wheel wells.  Clamping range - 11.5-14.00 mmThis is an Oetiker-style...

This fuel clamp is used with the 5mm low pressure cloth fuel hose in the fuel tank breather system.  This is the small hose that travels to and from the fuel expansion tanks in 2WD and in the rollover valves in the Syncro. In 2WD Vanagons, there are...

This fuel line clamp is used in a couple short sections of the fuel lines in your VW Vanagon. In 2WD Vanagons with a 12mm outlet on their fuel tank, you'll use two of these clamps on the short hose between the tank and the fuel pump. In Syncro Vanagons,...

This protective sleeve can help protect the 7mm (5/16") fuel lines in your Vanagon. Installation Note: Slide this sleeve over your new fuel hose and apply heat to the ends of the sleeve to keep the ends of the sleeve to keep them from fraying.  We...

SOLD BY THE Inch. 12mm fuel line runs from the tank to the pump. This is the feed line to the pump, it is not for a high-pressure location. 24 Inches is the normal length required (in which case you would order quantity 2). Please note that a 24 Inches...

Sold by the Inch, this 6.3mm fuel line is used on the fuel tank breather/vapor system and replaces the original 5mm hose. It is not the fuel line that runs to the engine. Made by Gates. Ref ID: 27068