Engine Mechanical Components

+.25mm (.010) on the crankshaft with standard case Main bearing set for all 2.1Ltr engines. Ref ID: 025198463A Shop by Diagram Hover over the icon and click to get the detail.  

This is the engine bracket that the motor mounts attach to. Fits all 2.1ltr engine 2wd and 4wd. Is also used on 1.9ltr engines when converting to the Rocky Mountain Westy stainless steel exhaust. Sold individually. Ref ID: 025199221A  

German gasket set - includes all seals pictured. Please note that amongst other seals and gaskets this kit does include both the rear main seal and front crank seal. The kit includes all seals and gaskets used during engine assembly and all gaskets and...

Standard crank and standard case main bearing set for all 2.1ltr engines. Ref ID: 025198461A Shop by Diagram Hover over the icon and click to get the detail.  

"IMPORTANT: This kit is for one side only. If you are doing both sides, order two. The kit includes head gasket, the two glues, one for the rubber head gasket, and one for the cap nuts for the cylinder head, and associated seals and gaskets. This kit is...

Distributor drive pinion. Fits 1.9ltr & 2.1ltr. This is what drives the distributor from crankshaft. If you need the washer as well please click here.Ref ID: 113105231B

Crankshaft gear that drives the camshaft. Fits 1.9Ltr &2.1Ltr watercooled motors. Ref ID: 113105209

Distributor drive gear on crankshaft. Fits all models including aircooled, except diesel. Ref ID: 111105223

New valve train push rod. Just in case yours gets bent. Please click here for the collaspeable push rod tube. Ref ID: 025109301 Shop by Diagram Hover over the icon and click to get the detail.  

OEM style push rod tube for 1.9L and 2.1L Vanagon motors.  To install this tube, the cylinder head must be removed from the motor.  If you don't want to remove the cylinder head, we also offer spring loaded tubes.   Ref ID:...