Wiring & Electrical Connectors

Sidebar Sidebar Sidebar
  • 1986-91 2.1L Digifant Main Fuel Injection Harness (ECU) Installation diagram for 1986-91 2.1L Digifant Main Fuel Injection Harness (ECU)
    Add to Cart The item has been added

    1986-91 2.1L Digifant Main Fuel Injection Harness (ECU)

    This is the main Digifant fuel injection wiring harness and not the wiring harness for the sensors in the engine compartment for the MV engine code. There were several variations in the MV engine wiring harness over the years. This harness matches the...
    $749.95
    SKU: 006873
    Add to Cart The item has been added
  • VW Vanagon Engine Compartment Wiring Harness (Sensors) Diagram of installation of VW Vanagon Engine Compartment Wiring Harness (Sensors)
    Add to Cart The item has been added

    2.1L WBX Engine Compartment Wiring Harness (Sensors)

    Main engine compartment wiring harness, not to be confused with the ECU Engine Harness. It fits 86 thru 91 because it comes with both style connectors, early and late, for the coolant level sensor and connects for either the Syncro or 2wd temperature...
    $224.95
    SKU: 006943
    Add to Cart The item has been added
  • Ceramic H4 Pigtail Set Ceramic H4 Pigtail Set
    Add to Cart The item has been added

    Ceramic H4 Pigtail Set

    This ceramic H4 pigtail set is essential for high wattage H4 bulbs, as found in most aftermarket headlight housings. Use with 80-85 Vanagon's or vans that have converted H4 type bulbs and/or headlight housings. Sold as a pair
    $14.95
    SKU: 004522
    Add to Cart The item has been added
  • Engine Ground Strap - Original style
    Add to Cart The item has been added

    Engine Ground Strap - Original style

    This is the engine ground strap used to ground the ignition system in your van. This is the original style braided strap. Please click here to see the less expensive alternative version. Fits 1983.5-91 watercooled Vanagons. Ref ID: 859971233
    $13.95
    SKU: 002962
    Add to Cart The item has been added
  • H3 Bulb PIgtail
    Add to Cart The item has been added

    H3 Bulb PIgtail

    1986-1991 Vans with rectangular headlights use H3 bulbs for the inner high beams. Over time, the factory connectors get corroded and fragile.  These pigtails will get you up and running with bright light again. Overall length 7" Sold as a...
    $9.95
    SKU: 004543
    Add to Cart The item has been added
  • Ratcheting Wire Terminal Crimpers
    Add to Cart The item has been added

    Ratcheting Wire Terminal Crimpers

    Save your hands!  Ratcheting Wire Terminal Crimpers for installing electrical connectors and terminals. Features: 0.5-6mm2 AWG 20-10 Non-Insulated Receptacles Tab 4.8mm ,6.3mm ,7.8 mm Width Terminals Ref ID: LX03B
    $9.95
    SKU: 003463
    Add to Cart The item has been added
  • VW Audi 14-PIn Fuse Box Connector
    Add to Cart The item has been added

    VW Audi 14-PIn Fuse Box Connector

    14 pin connector for the fuse box. Fit 86-on 2wd and 4wd. Heavens forbid if you need this connector, but as the vans get older we were asked if we had these and decided to bring some in from Germany. Sold individuallyRef ID: 171971971R
    $9.95
    SKU: 001833
    Add to Cart The item has been added
  • Vanagon 7 PIn Plug (Female Side)
    Add to Cart The item has been added

    Vanagon 7 PIn Plug (Female Side)

    This seven-pin electrical connector is used on Vanagon engine and tail light harnesses in the engine compartment. This plug is often deformed by heat or brittle with age. This female side of the plug and comes complete with with new pins. The male side...
    $6.95
    SKU: 002916
    Add to Cart The item has been added
  • Vanagon 7 PIn Plug (Male Side)
    Add to Cart The item has been added

    Vanagon 7 PIn Plug (Male Side)

    This seven-pin electrical connector is used on Vanagon engine and tail light harnesses in the engine compartment. This plug is often deformed by heat or brittle with age. This male side of the plug and comes complete with with new pins. The female side...
    $6.95
    SKU: 002917
    Add to Cart The item has been added
  • 30A Fuse Holder with Cap
    Add to Cart The item has been added

    30A Fuse Holder with Cap

    30A Fuseholder for ATF/ATO Type Full Size Blade Fuses. To install: The terminals must come back into the housing AFTER crimping. Insert the wires through the seal and housing Crimp on the terminals Pull the wires back into the housing Push the seal...
    $5.81
    SKU: KT-000874
    Add to Cart The item has been added