Radiator, Coolant Pipes & Junctions

For 2.1L motors. This is the stainless steel hard metal pipe that runs between the oil cooler and the thermostat housing. Please click here for a replacement hoses one to the thermostat housing hose or to the oil cooler hose.  Ref ID:...

Right side radiator mounting bracket for 1983.5-1991 water-cooled Vanagons.  Fits both WBX and diesel applications. Air-cooled vans that are converting to water-cooled can also use this bracket as part of the swap. Click here for the left side...

This is a metal update of the original plastic version. The plastic ones warp and leak so VW updated these to a metal unit. Location - this part is bolted on the cylinder head near cylinder #2 (passenger side towards the rear) and the 7mm hose comes off...

5/8 x 5/8 x 5/8" Tee (Metal). This heater core tee is used in our heater core hose kit and is used in conjunction with our rear heater core hose reducer. This tee, when used in our heater core hose kit eliminates the stock heater core tee that was 5/8...

This radiator fan ground strap is designed to provide much-needed additional grounding for the radiator fan on 1986-91 vans with A/C. Connect one end of the strap to the radiator fan ground post. Route the strap to the driver's side frame rail. Use the...

This radiator fan switch lives in the radiator and is responsible for turning the electric radiator fan on and off when you need extra engine cooling.   Old fan switches can fail completely or simply lose calibration when corrosion builds up on...

Cylinder head coolant flange for Tiico inline four-cylinder conversions. Please click here for the single coolant outlet.

This is the rubber washer that fits the upper and lower radiator mounting pins. 4 per van. Sold as a set of 4 washers. In other words, order 1 and get 4. Ref ID: 171121276D  

Water Outlet on side of Tiico cylinder head. Please click here for the coolant flange with holes for the sensors. Includes o-ringRef ID: 026121144A

Tiico water pump gasket. This is the gasket we prefer for the Tiico engine conversion for the Vanagon. Ref ID: KA5020

High quality hose clamp.  SAE #28 size, 33mm-57mm range.Ref ID: 64028

This radiator bleeder valve bolt replaces the original in your Vanagon's radiator. Fits all watercooled Vanagons 1983-91. Sold individually. Ref ID: N0102376