Bulbs, Switches & Relays

This kit will fit all Tintop (non-camper) vans that came with the three stock interior light housings. One above the driver and two in the rear - one on either side of the rear bench seat. This kit also includes an LED map light bulb, located above the...

Driver's door 2-pin interior light switch.  This is the real deal!  This switch differs from the other interior light switches on the market as it has 2 pins instead of one. If you need, here is the one-pin switch. Sold Individually Ref ID:...

Genuine VW relay plate for Glow Plug, AC, and more.  VW Used this in several locations in the van.Ref ID: 251937501B

If you use either the LED Front Turn Signal Bulbs or LED Rear Turn Signal Bulbs you will need to use this relay to prevent "hyperflash", the phenomenon that happens when using LED bulbs with a traditional turn signal relay.   Please note: While...

This windshield washer pump can work as either a front or rear washer pump in your Vanagon. If used on the front, the connectors are different than factory, so you will need to use readily available female butt connectors. Sold Individually Ref ID:...

This interior light switch lives in the door jams and triggers your Vanagon's dome light when a door opens.  Originally made for the front driver's door, we like to install these in the passenger door and slider as well. This switch has the ability...

High wattage 100W H3 Bulb for use in the inner square high beams for 1986-91 vanagons. Sold individually.This is a higher wattage replacement bulb for the square inner high beams on late-model Vans with the square headlights, and also can replace the...

LED front turn signal & parking light bulb. Sold individually. This LED bulb cannot be used without the special LED Turn Signal Relay available since it requires a more sensitive relay to compensate for the minimal resistance/draw LED bulbs have...