Wheels, Tires, Driveshaft

This cone seat wheel lug nut fits VW factory original 14" alloys and other 15" and 16" alloys that require cone seat lug hardware. Chrome in color. Note: 2WD requires 10 nuts and 10 bolts Syncro uses 20 nuts. 

Wheel bolt radius (ball seat) M14X1.5x28mmUse for Mefro rimsRef ID: AC601SB34R

This CV boot clamp lives at the small end of each of the CV joints in all Vanagons from 1980-1991. This clamp is included in our CV joint and CV boot kits as well. This is an oetiker style pinch clamp which is the most reliable in this application. ...

This bolt is used in two very different applications in the Vanagon: In Syncros it secures the inner cv joint on the front axle to the differential. In 2.1L 2WD vans it serves as the upper bolt in the thermostat housing. in Syncros it serves as both the...

VW originally used 12-point triple square bolts on all the factoryCV joints, however often people replace them with six-point bolts.  The 12-point bolt provides more points of contact for your removal tool and therefore we recommend the 12-point...

This CV bolt washer is serrated to lock the bolt in place when torqued.  We recommend replacing your serrated washers when replacing your CV joints or boots, especially if the teeth on yours have become dull. Used on all 2WD and Syncro model...