Wheels, Tires, Driveshaft

This German CV joint kit for the front inner location of the VW Syncro Vanagon has everything you'll need to replace your failing boot. Fits both 14" and 16" Syncro. Kit contains: CV boot High quality CV grease (6) 12-point CV bolts (2) Boot clamps Axle...

High strength hardware to install your CV axle. 12 bolts and 12 serrated washers Fits for both 2WD and 4WD axles 12-point triple-square bolts as original If replacing both axles, you'll need two bolt kits Please click here if you need the bolts,...

Excellent quality rear inner wheel bearing.  If you hear a rumbling from the rear of your van at speed on the highway, you may need a new wheel bearing.  Don't skimp on this critical repair! Fits all models 1980-91 Also fits bay window buses...

These longer-than-stock 45mm wheel studs are sold in sets of five and are perfect if you're running wheel spacers. Please note whenever changing the length of studs, you must confirm that the nut does not bottom out on the stud before it tightens the rim...

This syncro driveshaft hardware kit will give you peace of mind when installing your new driveshaft. Includes (8) high tensile bolts and nuts.Ref ID: KT-5982101

These hub caps are for the factory 14-inch alloy rim. It is our opinion though that the color is just slightly darker than the originals, but the fit is excellent and these are the only game in town. Sold individually. Ref ID: 251601171

This 46mm rear axle nut is CRITICAL to the rear drivetrain of your van or bus! Without proper torque of 360 ft/lbs, this nut can come loose and ruin your day. Fits all Vanagon models 1980-91 Fits all bay window bus models 1968-71 Fits split window bus...

This M8 12-point triple square drive bit for 3/8" drive socket wrench is just what you need to replace your CV's and CV boots. Note:  Please check your CV bolts before ordering as some vehicles can have 12 point bolts or 6-point socket head bolts...

This center cap fits any of our Eurolook alloy wheels. Fits both 15" and 16" sizes Silver in color Easy installation  

Six-point 6mm hex drive socket for use with aftermarket Vanagon CV bolts.   NOTE: Original CV bolts had 12-point socket heads.  We offer this tool to use if someone has replaced the original 12-point bolts with 6-point.  We feel that...