Westfalia Parts

Our complete skylight hardware kit comes with all of the hardware you will need to refurbish the skylight in your Westy.Ref ID: 255070760

Westfalia cabinet latch in brown.  In a full Westy there are eight of these for all the various cupboard doors. Also available in grey by clicking here!

Westfalia cabinet latch in grey.  In a full Westy there are eight of these for all the various cupboard doors. Also available in brown by clicking here! Ref ID: 255070915B-0002

If the end cap on your HS2211 is damaged, we recommend replacement to keep your unit from dust contamination. New seal included!   Ref ID: 2986166

This Propex ducting Y-junction can be used to connect sections of 60mm ducting in installations of either the HS2000 or HS2211 heaters. The fitting measures 65mm in its inner diameter and the ducting simply slides into either end of the fitting.

This Propex fixed directional vent is used with either 60mm (for HS2000) or 76mm (for HS2800) reducers to connect to the outlet ducting during heater installation. You would use this vent in the case that you want more than one vent in your installation...

Propex silicone 90-degree elbow used to attach the combustion exhaust pipe in the HS2000 and HS2211 heater models.  The original connector is straight.  This optional 90-degree bend allows for routing the exhaust pipe with fewer bends...

These T-junctions screw directly into either the HS2211 outlet vents or accept all ducting found in HS2000 and HS2211 heater installations. Note:  When installing this junction we highly recommend installing the long straight top of the tee...

If you have rain streaming or wind squealing through the skylight of your Westfalia, you may need a new seal. Super easy installation! Ref ID: 253070765