Add to Cart The item has been added Timing Hole Cap with Strap for Bell Housing This Timing Hole Cap with Strap fits the hole in Bell Housing on all 1980-91 aircooled and watercooled Vanagons. It's also used in conjunction with the diesel bell housing timing hole plug. Ref ID #020301132 $2.95 SKU: 001290 Add to Cart The item has been added
Add to Cart The item has been added Plastic Base For Shifter This plastic base for the Vanagon shifter is available individually, but is included in our complete shifter base kit. Shop by Diagram Hover over the icon and click to get the detail. Ref ID: 171711227A $2.49 SKU: 001809 Add to Cart The item has been added
Add to Cart The item has been added O-ring For Differential Lock Actuator Shaft - 8MM This o-ring seals the outer end of the differential lock actuator shaft on Syncros with locking differentials. This o-ring installs in the inner bore of the actuator aluminum sleeve. Fits 1990-on. NOTE: This o-ring has an 8mm inner diameter... $2.29 SKU: 001640 Add to Cart The item has been added
Add to Cart The item has been added O-Ring - Syncro Diff Lock Actuator Shaft & Speedo Drive Sleeve This o-ring pulls double duty in your 1986-91 Syncro vanagon. Fits: Speedometer drive sleeve in the front differential Aluminum sleeve on the diff lock actuator shaft Two per Syncro, sold individually. Ref ID: N90262101 $1.95 SKU: 003581 Add to Cart The item has been added
Add to Cart The item has been added O-ring For Differential Lock Actuator Shaft - 6MM This o-ring seals the outer end of the differential lock actuator shaft on Syncros with locking differentials. Fits 1986-1989 Syncros NOTE: This o-ring has a 6mm inner diameter and fits 1986-89 Syncros. Please measure yours to be sure this is... $1.95 SKU: 001639 Add to Cart The item has been added
Sold out Out of stock Reverse Light Switch Housing O-Ring This is the o-ring that goes between the transmission housing and the reverse light switch housing. Fits 1983.5-1991 vans both 2WD and Syncro. Ref ID: 094301278A $1.95 SKU: 001643 Out of stock
Add to Cart The item has been added Roll Pin For Shift Selector Lever at Transmission Factory roll pin that secures the shift selector lever to the shift selector shaft on the transmission. Removal of this pin is required to remove the lever when replacing the seal. Fits 1983-1991 2WD and Syncro Vanagons with manual... $1.95 SKU: 003542 Add to Cart The item has been added
Sold out Out of stock Syncro Transmission Mount Bolt This bolt secures the Syncro transmission to the transmission mount. Fits 1986-91 Syncro Vanagons Two per van, sold individually.Ref ID: N0105003 $1.95 SKU: 003483 Out of stock
Add to Cart The item has been added Transmission Side Cover O-Ring This transmission side cover o-ring seals the side cover to the body of the transmission. We've found that the vast majority of transmission fluid leaks from the side of the trans are from the flange cap (leaks into the CV) or drive axle seal (leaks down... $1.95 SKU: 001267 Add to Cart The item has been added
Add to Cart The item has been added Transmission Adjusting Ring Lock Screw This is the fastener for the plastic lock plate that locks the transmission sidescrew adjusting ring. Fits all manual transmission Vanagons including Syncro. Two per cap, four per van. Sold individuallyAlso fits Type 2 bus 1968 thru 79. Ref ID:... $1.49 SKU: 003550 Add to Cart The item has been added
Add to Cart The item has been added Roll Pin for Differential Lock Actuator Fork Differential lock actuator fork roll pin. When you knock this fork pin out you can sometimes damage it. Always good to grab a spare.Ref ID: N0133051 $1.29 SKU: 003401 Add to Cart The item has been added
Add to Cart The item has been added Circlip for Differential Lock Actuator Shaft This circlip lives on the diff lock actuator shaft that engages the differential lock. Ref ID: N0124171 $1.24 SKU: 003498 Add to Cart The item has been added
