Wheels, Tires, Driveshaft

Early front outer wheel bearing. This will fit all 1980-83 Vanagons and early 1984. According to Volkswagen, this bearing will fit up to chassis number 24-E 023827, but in some cases, we have found this to be incorrect. The best way to check is to...

M8 triple square drive bit for 3/8" drive socket wrench. Please check your CV bolts before ordering as some vehicles can have 12 point bolts or 6-point bolts. Also sometimes referred to as a "triple-square bit". Please click here for the 12-point tool...

This center cap fits any of our Eurolook alloy wheels. Fits both 15" and 16" sizes Silver in color Easy installation  

Six-point 6mm hex drive socket for use with aftermarket Vanagon CV bolts.   NOTE: Original CV bolts had 12-point socket heads.  We offer this tool to use if someone has replaced the original 12-point bolts with 6-point.  We feel that...

This circlip secures the rear wheel bearing in all models of Vanagon and Bay window bus. Fits 1968-1991 Sold individually.Ref ID: N0122951 Shop by Diagram Hover over the icon and click to get the detail.  

This boot is used on all vans including Syncro for the rear axles. In a pinch, it can be used for the Syncro front inner, but we prefer to use the stock Syncro Front Boot Kit in conjunction with the stock Syncro flange or the Rockford boot. In our...

Replacing this front locking axle nut when you replace your rotor or wheel bearings is cheap insurance.  This nut is peened with a hammer and small punch during installation.  Repeated re-use of old nut weakens its shoulder, causing it to...

This spare tire spring clip allows the release hook to remain under tension while holding the spare tire clam shell in position.Ref ID: 251803687A

Front wheel bearing seal for all 2wd Models.Ref ID: 251407641A

This is the correct wheel hardware for both factory 14" alloys and aftermarket 15" and 16" alloys that require cone seat lug hardware.  It is also used with South African steel wheels as cone seat hardware is used with them. Fitment note:  2WD...

This rear wheel bearing seal fits both inner and outer positions in the rear hub assembly of our vans.  Replace these seals when replacing the rear wheel bearings. Fits 1980-1991 2WD and Syncro vans Also fits 1968-1979 bay window buses You will...