Wheels, Tires, Driveshaft

The 46mm rear axle nut on your Vanagon is torqued to a whopping 360 foot pounds.  Most home mechanics don't have the massive 3/4" impact tools to loosen the nut for repairs.  This axle nut tool is the answer. These nuts are TIGHT!  Add to...

This complete CV boot kit features high quality German made components. Kit includes: CV boot (6) 12-point CV bolts High quality CV grease Lock Ring CV clamp Consider upgrading to the Rockford boots here . If you need some serrated washers, please...

This precision made rear wheel bearing spacer is responsible for maintaining the correct lateral tension on your rear wheel bearings. Fits all models Vanagon 1980-1991 Also fits 1968-1971 Bay window buses One per side, two per van Sold individually...

Redline CV-2 grease outperforms the best conventional or synthetic greases and lubes. Withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints. Also great for use with Poly Urethane bushings. Excellent high-temp...

High strength hardware to install your CV axle. 12 bolts and 12 serrated washers Fits for both 2WD and 4WD axles 12-point triple-square bolts as original If replacing both axles, you'll need two bolt kits Please click here if you need the bolts,...

Excellent quality rear inner wheel bearing.  If you hear a rumbling from the rear of your van at speed on the highway, you may need a new wheel bearing.  Don't skimp on this critical repair! Fits all models 1980-91 Also fits bay window buses...

These longer-than-stock 45mm wheel studs are sold in sets of five and are perfect if you're running wheel spacers. Please note whenever changing the length of studs, you must confirm that the nut does not bottom out on the stud before it tightens the rim...

This front outer wheel bearing fits 1985-91 2WD and later 1984 Vanagons. Fitment Note:  According to Volkswagen, this bearing will fit from chassis number 24-E 023828, but in some cases, we have found this to be incorrect. The best way to check is...

These hub caps are for the factory 14-inch alloy rim. It is our opinion though that the color is just slightly darker than the originals, but the fit is excellent and these are the only game in town. Sold individually. Ref ID: 251601171

This 46mm rear axle nut is CRITICAL to the rear drivetrain of your van or bus! Without proper torque of 360 ft/lbs, this nut can come loose and ruin your day. Fits all Vanagon models 1980-91 Fits all bay window bus models 1968-71 Fits split window bus...

Early front outer wheel bearing. Fit all 1980-83 Vanagons and early 1984. Note: According to Volkswagen, this bearing will fit up to chassis number 24-E 023827, but in some cases, we have found this to be incorrect. The best way to check is to measure...

This M8 12-point triple square drive bit for 3/8" drive socket wrench is just what you need to replace your CV's and CV boots. Note:  Please check your CV bolts before ordering as some vehicles can have 12 point bolts or 6-point socket head bolts...