Manual Transmission

This is the large stop cap for the shift rod that is on the other side of the transmission case from the shift lever. Fits 83.5 thru 91-2wd. Please click here for the circlip or spring. Ref ID: 020301268D

This shift lever lives on the transmission and is the link between the rear shift rod and the input to the trans.  The nylon ball wears down over time and the resulting play creates sloppy shifting. Fits 1983-91 watercooled vans, including Syncros...

Metal shift base. Also available in our complete shifter base kit. Shop by Diagram Hover over the icon and click to get the detail.   Ref ID: 171711107A

Pack of two socket bearings required to rebuild the shifter base of all manual-transmission Vanagons.  These are also included in our complete shifter base rebuild kit. Shop by Diagram Hover over the icon and click to get the detail.  

Genuine VW shift fork guide ball sleeve.  There are six required for all manual transmission Vanagons. We HIGHLY recommend replacing these ball sleeves at each transmission rebuild as the slider ball bearing can fall into the transmission if this...

This kit contains the two bushings and the special bolt and nut that fasten the shift lever to the shift rod. You will receive: 1 bolt, 2 bushings, and 1 nut. Fits 1983-91, 2WD and 4WD. Ref ID: 251798116 Shop by Diagram Hover over the icon and click to...

Fill plug for 2WD (manual & automatic transmissions) and 4WD. Uses 17mm allen wrench. Also for syncro owners this is the fill plug for the front diff as well. Sold individually Ref ID: WHT001937

Plastic hemisphere for the14mm Vanagon shifter.  This part slips in the bottom of the metal shifter lever (what you shift with) and is captive in a round shell that limits the travel of your shifter.  If your shifter has become sloppy, it may...

Manual Transmission Main Shaft Bearing. Sold individually. Ref ID: 002311125A