Transmission

Fits all automatic transmission Vanagon, and also fits Bay Window Bus 68 thru 79 with the 3-speed automatic transmission.  Ref ID: 090321431

Pinion shaft bearing nut. One per manual transmission, fits all years.Ref ID: 002311223A

Includes pan gasket, 1 screen, and paper gasket. You will also need ATF, but while you are servicing the automatic section, even if you are not servicing the final drive section, it is wise to at least check the fluid level in that section. Final drives...

Neutral safety switch contact. This is the safety device to only allow the van to start in park or neutral and also has the contacts which engage reverse lights. If you have to wiggle the stick to get the starter to engage, then these parts are worn out...

This is the lock collar on the shift lever for manual transmission Vanagons. Fits both 12mm and 14mm shifter. Does not fit vans with 5-speed transmission Set screw included This collar is also included in our complete shifter base kit. Shop by...

There are two of these seals on the differential for the automatic transmission. Also, know as the pinion seals in the Bentley workshop manual. When these seals fail it allows the automatic transmission fluid to be pumped into the final drive section...

This is the large stop cap for the shift rod that is on the other side of the transmission case from the shift lever. Fits 83.5 thru 91-2wd. Please click here for the circlip or spring. Ref ID: 020301268D

Rear shift rod bushing plate. Holds the bushing and flanges on manual transmission 83.5 thru 91 2wd or 4wd. These are going NLA and this is the last one available - grab this plate while you still can! Ref ID: 251711187B Shop by Diagram Hover over...