Hardware & Gaskets

Kit includes: 4 studs, 26 various length bolts, 24 washers, and 21 nuts. At cylinder head, use 4 studs, 4 - 30mm bolts, 8 wavy washers and 4 regular nuts. Use 3 30mm bolts and 3 wavy washers for the tailpipe. Use 30mm bolts (or 40mm when metal donut is...

Our 1.9L exhaust gasket set is the perfect solution for installing the exhaust system on your 1983.5-85 VW Vanagon.   This set includes: (6) Two-bolt flange gaskets (2) Catalytic converter gaskets (1) Tailpipe gasket

1.9Ltr catalytic converter gasket and hardware set. Includes 2 Catalytic Converter Gaskets 6 8mm Copper Lock Nuts 6 Flat Washers 6 M8x1.25x30-Hex Bolt Fits CARB-compliant and Federal catalytic converters Ref ID: KT-2985103  

Install your Vanagon tailpipe with the factory correct hardware.  Includes everything you need to get to attach your tail pipe to your muffler. Fits 1980-91 Vanagons with air cooled and WBX 1.9L and 2.1L motors. Note: The threads in your OEM muffler...

This is the cap that screws onto the test tube on the exhaust elbow before the catalytic converter. This outlet allows you to test the exhaust before the catalytic converter. When analyzing emissions to set mixture or diagnose a running issue, it can be...

Catalytic converter to muffler gasket.  Fits 1.9L and 2.1L watercooled and all air-cooled Vanagons. Fits both CARB-compliant and Federal-standard emissions. Ref ID: 443253115B

Muffler to tailpipe gasket. Fits aircooled 80 thru 83.4, All diesel Vanagon, except turbo diesel, 1.9Ltr & 2.1Ltr watercooled. Ref ID: 025251235

Multi-layered metal sealing gasket for sealing exhaust manifolds to the cylinder head and one other junction on the exhaust system. Fits 1983.5-91 1.9L & 2.1L watercooled vans.Ref ID: N90131602

8X38mm. These exhaust manifold studs attach the header pipes to the cylinder head. Van Cafe recommendation:  If the studs on your motor are in good shape then leave them alone, but if they are stripped, corroded, or broken off then you will need...

These are copper exhaust locknuts that will not vibrate loose. Use these on all attachments that are through bolts on the exhaust system. It is best not to use these on the studs directly attached to the cylinder heads as they have more likelihood of...

Wave washers are used in conjunction with regular nuts, while flat washers are used in conjunction with the copper lock nuts. This washer is mainly used in the exhaust system when used with an M8 nut.  Also used to attach the thermostat housing.Ref...