Engine Mechanical Components

This is a high quality German engine gasket set for your Vanagon wasserboxer engine rebuild. The kit includes all seals and gaskets used during engine assembly and all gaskets and seals for components that touch the engine longblock. Note:  This kit...

Main bearing set for all 1.9Ltr engines. +.25mm (.010) on the crankshaft and standard on the case. Ref id: 025198463

"IMPORTANT: This kit is for one side only. If you are doing both sides, order two. The kit includes head gasket, the two glues, one for the rubber head gasket, and one for the cap nuts for the cylinder head, and associated seals and gaskets. This kit is...

This distributor drive pinion gear runs off a brass gear on the engine crankshaft to turn the distributor rotor. Fits 1.9ltr & 2.1ltr vans Fun fact:  this pinion gear also fits Beetles from 1961-79, Ghia from 1961-74, Type 2 bus from 1960-71,...

This crankshaft timing gear drives the camshaft on 1.9Ltr &2.1Ltr watercooled motors. We recommend replacing this gear if yours exhibits any pitting or wear during an engine rebuild. Ref ID: 113105209

This brass distributor drive gear lives on the crankshaft.  It's made out of a softer metal than the distributor so it will wear rather than the distributor pinion.  Be sure to replace this at every engine rebuild. Fits all models of Vanagon...

New valve train push rod. Just in case yours gets bent. Please click here for the collaspeable push rod tube. Ref ID: 025109301 Shop by Diagram Hover over the icon and click to get the detail.  

Grant brand is made in the USA. In the shop, this is our preferred brand. Fits both 2.0Ltr aircooled and 19Ltr watercooled.94mm X 1.75mm X 2.0mm X 4.0mmRef ID: 029198175BR

These Mahle brand camshaft bearings are good quality at a reasonable price. Please note that there is an extra notch on the flanged bearings that you'll have to carefully file down flush before installing. Very easy operation. Ref ID: 025198541 Shop by...

These connecting rod bearings are the best on the market.   German Kolbenschmidt brand Note:  These are oversize (54.75mm) + .010 / .25mm for reconditioned rods.  Please check your connecting rods before placing your order. Ref ID:...