CV Axles & Components

Does your van suffer from a leaky rear axle seal that you just can't seem to tackle?  Use this sleeve to repair your worn cv axle!  If there is even slight wear on your cv axle where it rotates in the axle seal, the seal will no longer be able...

Our convenient CV bolt kit comes with everything you need to install an axle in your Vanagon. Our kit contains: (12) Hardened 12-point CV joint bolts (12) Serrated washers 12-point triple square socket for removing and installing VW CV bolts  This...

Redline CV-2 synthetic grease outperforms the best conventional or synthetic greases and lubes.  It withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints. Sold here in a 14oz jar which many people find...

This excellent quality Rockford rear CV boot is thicker and far more durable than either the original or replacement boots on the market. Notes: Fits 1980-91 vanagons, also fits 1968-79 Bay window buses Fits all 2WD locations (four per van) Fits Syncro...

The 46mm rear axle nut on your Vanagon is torqued to a whopping 360 foot pounds.  Most home mechanics don't have the massive 3/4" impact tools to loosen the nut for repairs.  This axle nut tool is the answer. These nuts are TIGHT!  Add to...

This complete CV boot kit features high quality German made components. Kit includes: CV boot (6) 12-point CV bolts High quality CV grease Lock Ring CV clamp Consider upgrading to the Rockford boots here . If you need some serrated washers, please...

Redline CV-2 grease outperforms the best conventional or synthetic greases and lubes. Withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints. Also great for use with Poly Urethane bushings. Excellent high-temp...

High strength hardware to install your CV axle. 12 bolts and 12 serrated washers Fits for both 2WD and 4WD axles 12-point triple-square bolts as original If replacing both axles, you'll need two bolt kits Please click here if you need the bolts,...

This 46mm rear axle nut is CRITICAL to the rear drivetrain of your van or bus! Without proper torque of 360 ft/lbs, this nut can come loose and ruin your day. Fits all Vanagon models 1980-91 Fits all bay window bus models 1968-71 Fits split window bus...

This M8 12-point triple square drive bit for 3/8" drive socket wrench is just what you need to replace your CV's and CV boots. Note:  Please check your CV bolts before ordering as some vehicles can have 12 point bolts or 6-point socket head bolts...

Six-point 6mm hex drive socket for use with aftermarket Vanagon CV bolts.   NOTE: Original CV bolts had 12-point socket heads.  We offer this tool to use if someone has replaced the original 12-point bolts with 6-point.  We feel that...