Climate Control

Want to use a flared connection when installing a Propex heater into your vehicle?  Here's the solution! This adapter fitting screws into your HS2000 or HS2800 and attaches to your 3/8" flared propane supply line. 3/8" Flare to BSPT High quality...

This piece is used with the 5/8 x 5/8 x 5/8 heater core hose tee. It is used to reduce the flow of coolant to the rear heater core and replace the NLA fitted VW hose with 5/8 heater hose while still keeping all coolant pressure in the Vanagon proper and...

Brass rear seat heater core bleeder valve screw with o-ring. There is only one screw per Van Sold individually Ref ID: 861819039AFT Shop by Diagram Hover over the icon and click to get the detail.  

O-Ring for the bleeder screw on the rear seat heater core. Sold individuallyRef ID: 861819039 Shop by Diagram Hover over the icon and click to get the detail.  

Use this fitting to replace the plastic fitting that goes from the heater control valve to the rubber hose. This fitting is also used in our rear heater core elimination kit. Sold individually Ref ID: 171121140D Shop by Diagram Hover over the icon and...

This tab holds the fresh air and heater climate control assembly in place. Fits all air and watercooled vans 1980-1991. Three per Van, sold individually. Ref ID: 251259395

Heater cable clips. 3 needed per watercooled van. Sold individually. Ref ID: 211255899A

The front heater core in your Vanagon is housed in a plastic box under the dashboard.  This box must be separated to access the heater core when the dreaded time of replacement comes.  At the factory, some boxes were put together with spring...

This air conditioning adjuster bolt tensions the AC compressor belt on the engine. Fits 1983-1991 Vanagons equipped with air conditioning. Sold individuallyRef ID: N01036112

Made from viton to increase longevity and temp range. Made in the USA. Sold individually Ref ID: 861819297 Shop by Diagram Hover over the icon and click to get the detail.