Propex Heaters & Parts

This Propex fixed directional vent is used with either 60mm (for HS2000) or 76mm (for HS2800) reducers to connect to the outlet ducting during heater installation. You would use this vent in the case that you want more than one vent in your installation...

Propex silicone 90-degree elbow used to attach the combustion exhaust pipe in the HS2000 and HS2211 heater models.  The original connector is straight.  This optional 90-degree bend allows for routing the exhaust pipe with fewer bends...

Propex 22mm-25mm silicone straight connector. High temperature silicone, this connector connects the combustion exhaust pipe to the HS2000 and HS2211 heaters. Rated to 500F. Fitment notes: Use appropriately sized hose clamps (not included) on both side...

Propex 25.5mm-30mm Straight ConnectorHigh temperature silicone, this connector connects the combustion exhaust pipe to the HS2800 heaters combustion outlet. Rated to 500F. Fitment notes: Use appropriately sized hose clamps (not included) on both side of...

These T-junctions screw directly into either the HS2211 outlet vents or accept all ducting found in HS2000 and HS2211 heater installations. Note:  When installing this junction we highly recommend installing the long straight top of the tee...

Want to use a flared connection when installing a Propex heater into your vehicle?  Here's the solution! This adapter fitting screws into your HS2000 or HS2800 and attaches to your 3/8" flared propane supply line. 3/8" Flare to BSPT High quality...