Wheels, Tires, Driveshaft

Six-point 6mm hex drive socket for use with aftermarket Vanagon CV bolts.   NOTE: Original CV bolts had 12-point socket heads.  We offer this tool to use if someone has replaced the original 12-point bolts with 6-point.  We feel that...

This circlip secures the rear wheel bearing in all models of Vanagon and Bay window bus. Fits 1968-1991 Sold individually.Ref ID: N0122951 Shop by Diagram Hover over the icon and click to get the detail.  

This boot is used on all vans including Syncro for the rear axles. In a pinch, it can be used for the Syncro front inner, but we prefer to use the stock Syncro Front Boot Kit in conjunction with the stock Syncro flange or the Rockford boot. In our...

Replacing this front locking axle nut when you replace your rotor or wheel bearings is cheap insurance.  This nut is peened with a hammer and small punch during installation.  Repeated re-use of old nut weakens its shoulder, causing it to...

This spare tire spring clip allows the release hook to remain under tension while holding the spare tire clam shell in position.Ref ID: 251803687A

Front wheel bearing seal for all 2wd Models.Ref ID: 251407641A

This is the correct wheel hardware for both factory 14" alloys and aftermarket 15" and 16" alloys that require cone seat lug hardware.  It is also used with South African steel wheels as cone seat hardware is used with them. Fitment note:  2WD...

This rear wheel bearing seal fits both inner and outer positions in the rear hub assembly of our vans.  Replace these seals when replacing the rear wheel bearings. Fits 1980-1991 2WD and Syncro vans Also fits 1968-1979 bay window buses You will...

CV Bolt Lock Plate used on all model Vanagons 1980-1991. If you need the serrated washers, please click here. If you need some CV bolts, please click here.Ref ID: 1J0407357A

Excellent quality grease for use in installing new CV joints or replaceing your worn CV boots.  This grease packet is the same grease that comes in our GKN CV joint kits. If you prefer high-quality Redline grease please click here. Note: Although...

These are simply the stock lug bolts that came on all of the Vanagons that were equipped with steel wheels. These are ball seat lugs and can be used with either the stock 14" German or 15" S. African steel rims. Black or silver in color depending on...

These lug nuts fit factory steel 14" wheels that came on 1980-91 VW Vanagons. These are 'ball seat' hardware as opposed to the 'conical' or 'acorn' used on alloy wheels. 2WD Vanagons will use ten of these lug nuts Syncros use twenty of these lug nuts...