Wheels, Tires, Driveshaft

Does your van suffer from a leaky rear axle seal that you just can't seem to tackle?  Use this sleeve to repair your worn cv axle!  If there is even slight wear on your cv axle where it rotates in the axle seal, the seal will no longer be able...

Redline CV-2 outperforms the best conventional or synthetic greases and lubes.Withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints. Also great for use with Poly Urethane bushings. Excellent high-temp...

Fits 2wd ONLY. Square Speedo hole sometimes gets rounded out causing speedo cable to stop spinning or spin erratically. These disappeared for a few years but we are pleased to report that VW started making them again. Caps can be used on the passenger...

Our convenient CV bolt kit comes with everything you need to install an axle in your Vanagon. Our kit contains: (12) Hardened 12-point CV joint bolts (12) Serrated washers 12-point triple square socket for removing and installing VW CV bolts  This...

Sold as a single unit. Fits all 2wd. Also used for the rear differential carrier in automatic transmissions. Ref ID: 113517185C

This excellent quality Rockford rear CV boot is thicker and far more durable than either the original or replacement boots on the market. Notes: Fits 1980-91 vanagons, also fits 1968-79 Bay window buses Fits all 2WD locations (four per van) Fits Syncro...

46MM tool to remove your rear axle nut on both 4WD and 2WD drive Vanagons. Best way to use this tool is slide it over the nut after removing the cotter pin and go at it with a sledgehammer to rotate it. Ref ID: 0057490 Shop by Diagram Hover over the icon...

This complete CV boot kit features high quality German made components. Kit includes: CV boot (6) 12-point CV bolts High quality CV grease Lock Ring CV clamp Consider upgrading to the Rockford boots here . If you need some serrated washers, please...

Redline CV-2 grease outperforms the best conventional or synthetic greases and lubes. Withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints. Also great for use with Poly Urethane bushings. Excellent high-temp...

High strength hardware to install your CV axle. 12 bolts and 12 serrated washers Fits for both 2WD and 4WD axles 12-point triple-square bolts as original If replacing both axles, you'll need two bolt kits Please click here if you need the bolts,...

Excellent quality rear inner wheel bearing.  If you hear a rumbling from the rear of your van at speed on the highway, you may need a new wheel bearing.  Don't skimp on this critical repair! Fits all models 1980-91 Also fits bay window buses...

These longer-than-stock 45mm wheel studs are sold in sets of five and are perfect if you're running wheel spacers. Please note whenever changing the length of studs, you must confirm that the nut does not bottom out on the stud before it tightens the rim...